Honda ACCORD HYBRID 2005 Service Manual page 1903

W i p e r M o t o r R e p l a c e m e n t
1. Open the hood. Remove the caps, nuts (A), and the
w i n d s h i e l d w i p e r arms (B).
2. Remove the hood seals (C) and cowl covers (D).
3. Disconnect the 5P connector (A) f r o m the w i p e r
motor.
B
C 9.8 N m (1.0 k g f m , 7.2 Ibf-ft)
4. Remove the four bolts (B) and w i p e r linkage
assembly (C).
5. Scribe a line (A) across the link and w i n d s h i e l d
w i p e r linkage t o s h o w the original adjutment.
Separate the w i n d s h i e l d w i p e r linkage (B) f r o m the
w i p e r m o t o r (C).
6. Install in the reverse order to r e m o v a l , and note
these items:
• A p p l y multipurpose grease t o the m o v i n g parts.
• Before reinstalling the w i p e r arms, turn the w i p e r
switch O N , then OFF to return the w i p e r shafts to
the park position.
• If necessary, replace any d a m a g e d clips.
• Check the w i p e r m o t o r operation.
22-221