Honda ACCORD HYBRID 2005 Service Manual page 1920

Gauges
D T C T r o u b l e s h o o t i n g
DTC B1152: Gauge Control Module EEPROM
Error
1. Clear the DTCs using the HDS.
2. Start the engine.
3. Check for DTCs by selecting the DTCs MENU
(DTCs) f r o m the HDS.
Is DTC B1152 Indicated?
YES—Faulty gauge control m o d u l e ; replace the
gauge control m o d u l e (see page 22-235). •
NO—Intermittent failure, the gauge control m o d u l e
is OK at this time. Check pinfits and connections. If
the connections are g o o d , check the battery
condition (see page 22-71), and the charging
system. •
DTC B1155: Gauge Control Module Lost
Communication (Headlight Switch Message)
with the Combination Switch Control Unit
1. Clear the DTCs using the HDS.
2. Cycle the ignition switch to OFF and then back O N .
3. Check for DTCs by selecting the DTCs MENU
(DTCs) f r o m the HDS.
Is DTC B1155 indicated?
YES — G o t o step 4.
NO—Intermittent failure. The gauge control system
is OK at this t i m e . Check pinfits and connections. •
4. Check for DTCs by selecting the DTCs MENU
(DTCs) f r o m the HDS.
Are DTCs B1007 or B1062 also indicated?
YES—Go to Combination Switch Control Unit Input
Test (see page 2 2 - 1 2 2 ) . •
NO—Go to Gauge Control M o d u l e Input Test
(see page 22-119). •
22-238