Honda ACCORD HYBRID 2005 Service Manual page 1830

Keyless/Power Door Locks/Security System
D o o r L o c k S w i t c h T e s t H o o d S w i t c h T e s t
Passenger's Door Lock Switch
1. Remove the front passenger's switch panel
(see page 20-7).
2. Disconnect the 10P connector f r o m the front
passenger's power w i n d o w switch.
1 2
f = l
3
4
5 6 7 8 9 10
3. Check for continuity between the terminals.
• There should be continuity between the No. 2
and No. 9 terminals w h e n the door lock switch is
in LOCK position. There should be no continuity
between the No. 2 and No. 9 terminals w h e n the
door lock switch is in the neutral position.
• There should be continuity between the No. 1
and No. 9 terminals w h e n the door lock switch is
in UNLOCK position. There should be no
continuity between the No. 1 and No. 9 terminals
w h e n the door lock switch is in the neutral
position.
4. If the continuity is not as specified, replace the door
lock switch.
1. Open the hood.
2. Disconnect the 2P connector f r o m the hood switch.
3. Check for continuity between the terminals.
There should be continuity between the No. 1 and
No. 2 terminals w h e n the hood is opened (lever
released). There should be no continuity between
the No. 1 and No. 2 terminals w h e n the hood is
closed (lever pushed d o w n ) .
4. If the continuity is not as specified, replace the
hood switch.
22-148