Sbus<N>:Spi:source:data - Agilent Technologies InfiniiVision 4000 X-Series Programmer's Manual

36
Obsolete and Discontinued Commands
:SBUS<n>:SPI:SOURce:DATA
Command Syntax
:SBUS<n>:SPI:SOURce:DATA <source>
<source> ::= {CHANnel<n> | EXTernal} for the DSO models
<source> ::= {CHANnel<n> | DIGital<d>} for the MSO models
<n> ::= 1 to (# analog channels) in NR1 format
<d> ::= 0 to (# digital channels - 1) in NR1 format
The :SBUS<n>:SPI:SOURce:DATA command sets the source for the SPI
serial MOSI data.
This command is the same as the :SBUS<n>:SPI:SOURce:MOSI command.
Query Syntax
:SBUS<n>:SPI:SOURce:DATA?
The :SBUS<n>:SPI:SOURce:DATA? query returns the current source for the
SPI serial MOSI data.
Return Format
<source><NL>
See Also
•
•
•
•
•
•
•
•
•
1162
(see page 1208)
"Introduction to :TRIGger Commands"
":SBUS<n>:SPI:SOURce:MOSI"
":SBUS<n>:SPI:SOURce:MISO"
":SBUS<n>:SPI:SOURce:CLOCk"
":SBUS<n>:SPI:SOURce:FRAMe"
":SBUS<n>:SPI:TRIGger:PATTern:MISO:DATA"
":SBUS<n>:SPI:TRIGger:PATTern:MOSI:DATA"
":SBUS<n>:SPI:TRIGger:PATTern:MISO:WIDTh"
":SBUS<n>:SPI:TRIGger:PATTern:MOSI:WIDTh"
Agilent InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
on page 935
on page 763
on page 762
on page 760
on page 761
on page 764
on page 766
on page 765
on page 767