Ip Igmp Ssm-Map Static - Juniper JUNOSE SOFTWARE 11.0.X - COMMAND REFERENCE A TO M 1-11-2010 Command Reference Manual

JUNOSe 11.0.x Command Reference Guide A to M

ip igmp ssm-map static

[ no ] ip igmp ssm-map static accessListName sourceAddress
Syntax
Command introduced before JUNOSe Release 7.1.0.
Release Information
Specifies an access list and source address for use in SSM mapping. SSM mapping
Description
statically assigns sources to IGMPv1 and IGMPv2 groups. You must use SSM mapping
for IGMPv1 and IGMPv2 hosts to interoperate with PIM SSM. SSM mapping allows
the router to use a statically configured list to translate (*,G) memberships to (S,G)
memberships. The no version removes the SSM map association.
Options
Privileged Exec, User Exec
Mode
818
ip igmp ssm-map static
accessListName Name of the access control list
sourceAddress Address of the source