Display Config-Agent - 3Com 5500G-EI Command Reference Manual

446 C 12: U
HAPTER SING

display config-agent

S M C
YSTEM ANAGEMENT OMMANDS
Description
Use the
display clock
time from the terminal display..
For the related commands, see
Example
View the current system date and clock.
<SW5500>display clock
15:50:45 UTC Mon 2001/2/12
Syntax
display config-agent unit-id
View
Any view
Parameter
Unit ID of current switch, in the range of 1 to 8.
unit-id
:
Description
Use the
display config-agent unit-id
configuration agent.
Configuration agent is one of the XRN features. You can log into one switch of the
fabric to configure and manage the fabric by the configuration agent. The
functions of the configuration agent include;
Distributing configuration commands to the right destination switches or
■
processing modules based on the resolution result of the commands input.
Sending output information of the commands from the switch you have
■
logged into to your terminal.
Supporting simultaneous configuration of multiple users.
■
You cannot configure the configuration agent, but can view the statistics of the
configuration agent.
Example
To display statistics of the configuration agent on switch 1, enter the following:
<SW5500>display config-agent unit-id 1
Config-agent info on Unit1
Config message recv:
Config message send:
Notification message recv:
Notification message send:
Information message recv:
Information message send:
command to obtain information about system data and
.
clock
unit-id
command to view statistics of the
Successful
10
10
10
10
3
1
Failed on
0
0
0
0
0
0