Display Lldp Tlv-Config - 3Com 5500-EI PWR Reference Manual

Hide thumbs Also See for 5500-EI PWR:

Table of Contents

Number of sent optional TLV

Number of received unknown TLV

display lldp tlv-config

display lldp tlv-config [ interface interface-type interface-number ]

interface interface-type interface-number: Specifies a port by its type and number.

Use the display lldp tlv-config command to display the TLVs that are currently sent through a port.

If no port is specified, this command displays all the TLVs that are currently sent through all the ports.

# Display all the TLVs that are currently sent through all the ports.

<Sysname> display lldp tlv-config

LLDP tlv-config of port 1 [Ethernet1/0/1] :

Basic optional TLV :

Port Description TLV

System Name TLV

System Description TLV

System Capabilities TLV

Management Address TLV

IEEE 802.1 extend TLV :

Port VLAN ID TLV

Port And Protocol VLAN ID TLV

VLAN Name TLV

IEEE 802.3 extend TLV :

MAC-Physic TLV

Power via MDI TLV

Link Aggregation TLV

Maximum Frame Size TLV

LLDP-MED extend TLV :

Number of the optional TLVs contained in an

LLDPDU sent through the port

Number of the unknown TLVs contained in a received

Table of Contents

5500-ei series