Refitting The Cable Harness - ABB IRB 8700 Product Manual

4 Repair

4.4.2 Refitting the cable harness

4.4.2 Refitting the cable harness
Location of the cable harness
The cable harness is located as shown in the figure.
xx1500001878
Required spare parts
Spare part
Cable harness
Required tools and equipment
Equipment, etc.
Standard toolkit
Sparkplug wrench
Continues on next page
210
Note
The spare part numbers that are listed in the table can be out of date. See the
latest spare parts of the IRB 8700 via myABB Business Portal,
rtal.abb.com.
© Copyright 2015-2020 ABB. All rights reserved.
Article number
3HAC050792-001
Article number Note
- Content is defined in section
toolkit on page
- Used to remove and refit the R1.SMB
in the base.
www.mypo-
Note
Standard
733.
Product manual - IRB 8700
3HAC052853-001 Revision: M