2
3
4
Product manual - IRB 8700
3HAC052853-001 Revision: M
Action
Use a mobile platform ladder (or similar)
to reach the upper end of the balancing
device.
DANGER
Do not use the robot as ladder!
Remove the screws, fitted in the screw
holes on top of the balancing device.
Note
Keep the screws. They shall be refitted
after the work is done.
Apply some Molykote on threads and at
the bottom end of two fully threaded
screws, used for unloading the balancing
device.
© Copyright 2015-2020 ABB. All rights reserved.
4.6.4 Unloading and restoring the balancing device
Note
Mobile platform ladder
xx1500001985
xx1500001971
M16x35
Screw M16x80 (Fully threaded, 2 pcs, 2
pcs)
Apply Molykote on colored areas.
xx1500002303
4 Repair
Continued
Continues on next page
445