2
3
4
Product manual - IRB 8700
3HAC052853-001 Revision: M
2.3.1 Lifting the robot with fork lift accessory set installed
Action
DANGER
Make sure that the robot is placed in its shipping
position, before removing any of the screws that
secure the robot to the foundation. If not, there is
a risk that the robot will tip over, resulting in injury
or damage.
Unscrew the two attachment screws with washers
that secure the robot to the foundation, situated
closest to where the fork lift accessory pockets
will be attached.
Remove the protection plugs.
© Copyright 2015-2020 ABB. All rights reserved.
2 Installation and commissioning
Note
xx1400002584
Continues on next page
Continued
53