ABB IRB 8700 Product Manual page 157

7
8
9
Filling oil into the axis-4 secondary gearbox
1
2
3
Product manual - IRB 8700
3HAC052853-001 Revision: M
Action
Use caution and remove the oil plug from
the fill hole.
Note
The fill hole is opened to speed up the
drainage.
WARNING
Used oil is hazardous material and must
be disposed of in a safe way. See section
Decommissioning on page 719
formation.
Refit the oil plugs.
Action
Run the robot to calibration position.
• Ax1 = No significance (as long as
the robot is secured to the founda-
tion)
• Ax2 = comfortable working position
• Ax3 = +3.5°
• Ax4 = 0°
• Ax5 = 0°
• Ax6 = No significance
DANGER
Turn off all:
• electric power supply
• hydraulic pressure supply
• air pressure supply
to the robot, before entering the robot
working area.
WARNING
Handling gearbox oil involves several
safety risks, see Gearbox lubricants (oil or
grease) on page 32.
© Copyright 2015-2020 ABB. All rights reserved.
3.4.5 Changing oil, axis-4 secondary gearbox
Note
for more in-
Tightening torque: 24 Nm.
Note
3 Maintenance
Continued
Continues on next page
157