ABB IRB 8700 Product Manual page 537

Robot position when replacing the mechanical stop pin
1
2
Removing the mechanical stop pin
1
2
3
Product manual - IRB 8700
3HAC052853-001 Revision: M
Action
Jog axis-1 to the position where it is pos-
sible to replace the mechanical stop pin.
DANGER
Turn off all:
• electric power supply
• hydraulic pressure supply
• air pressure supply
to the robot, before entering the robot
working area.
Action
CAUTION
The mechanical stop pin weighs 13 kg.
Put a piece of wood (or similar) underneath
the stop pin, to prevent it from falling down
uncontrolled, when the set screw is re-
moved.
Take a firm grip on the stop pin with one
hand.
© Copyright 2015-2020 ABB. All rights reserved.
4.8.2 Replacing the axis-1 gearbox
Note
xx1500002093
Note
xx1500002091
Continues on next page
4 Repair
Continued
537