ABB IRB 8700 Product Manual page 56

2 Installation and commissioning
2.3.1 Lifting the robot with fork lift accessory set installed
Continued
3
4
5
6
7
Continues on next page
56
Action
DANGER
Turn off all:
• electric power supply
• hydraulic pressure supply
• air pressure supply
to the robot, before entering the safeguarded
space.
CAUTION
The weight of the IRB 8700 robot is 4,750 kg
All lifting accessories used must be sized accord-
ingly.
Use caution and insert the trucks forks into the
fork lift accessory pockets, without damaging
anything on the robot or other equipment.
Use caution and lift the forks of the truck up, until
they start touching the fork lift accessory set, but
not taking the weight of the robot.
CAUTION
Do not lift up too much! This will make it more
difficult to remove the remaining attachment
screws, that secure the robot to the foundation.
Unscrew the remaining screws (4 pcs) that secure
the robot to the foundation.
© Copyright 2015-2020 ABB. All rights reserved.
Note
CAUTION
Lifting the robot using the fork lift
accessory set, shall only be done
with the trucks forks completely
inserted in all four pockets. If not,
there is a risk of injury or damage
when the robot is lifted up.
Product manual - IRB 8700
3HAC052853-001 Revision: M