4.8 Gearboxes
4.8.1 Replacing the hub
Location of the hub
The hub is located as shown in the figure.
xx1500002036
The location of the hub is inbetween motor and gearbox on all six axes. The figure
shows one example, but the principle is the same for all axes. The number of
attachment screws and pinion differ.
Required spare parts
Spare part
Hub with pinion
Required tools and equipment
Equipment, etc.
Hub tool
Leak-down tester
Standard toolkit
Product manual - IRB 8700
3HAC052853-001 Revision: M
Note
The spare part numbers that are listed in the table can be out of date. See the
latest spare parts of the IRB 8700 via myABB Business Portal,
rtal.abb.com.
© Copyright 2015-2020 ABB. All rights reserved.
Article number
3HAC049795-003
Article number
Note
3HAC071355-001
Used for removal and refitting of the
hub.
-
-
Content is defined in section
toolkit on page
4 Repair
4.8.1 Replacing the hub
www.mypo-
Note
Standard
733.
Continues on next page
527