Repair; Introduction - ABB IRB 8700 Product Manual

Hide thumbs Also See for IRB 8700:

Table of Contents

4 Repair

Structure of this chapter

This chapter describes repair activities for the IRB 8700. Each procedure contains

the information required to perform the activity, for example spare parts numbers,

required special tools, and materials.

Report replaced units

Safety information

Make sure to read through the chapter

service work.

Product manual - IRB 8700

3HAC052853-001 Revision: M

Repair activities not described in this chapter must only be carried out by ABB.

When replacing a part on the IRB 8700, report to your local ABB the serial number,

the article number, and the revision of both the replaced unit and the replacement

This is particularly important for safety equipment to maintain the safety integrity

of the installation.

If the IRB 8700 is connected to power, always make sure that the IRB 8700 is

connected to protective earth and a residual current device (RCD) before starting

any repair work.

For more information see:

Product manual - IRC5

Safety on page 17

before commencing any

4.1 Introduction

Irb 8700 - 550/4.20 Irb 8700 - 800/3.50