ABB IRB 8700 Product Manual page 491

3
4
5
6
Removing the axis-4 motor
1
Product manual - IRB 8700
3HAC052853-001 Revision: M
Action
Make sure the o-ring is present.
Disconnect the motor cables.
Remove the cable gland cover.
Make sure the gasket is not damaged.
Tip
Make a note in which direction the cable
gland hole is facing, if the motor will be re-
moved too. The motor shall be refitted in
the same position.
Use caution and pull out the motor cables.
Action
CAUTION
Use caution when releasing the brakes!
Axis-4 can move unexpectedly!
© Copyright 2015-2020 ABB. All rights reserved.
4.7.3 Replacing the axis-4 motor
Note
xx1200001070
xx1200001066
xx1200001067
Note
Continues on next page
4 Repair
Continued
491