8
9
10
11
Product manual - IRB 8700
3HAC052853-001 Revision: M
Action
Required oil level is when the oil level is visible
just below the lower edge of the inspection hole,
with axis-5 approximately jogged +82° from the
starting position.
Add or drain oil, if required.
Refit the oil plug.
DANGER
Make sure all safety requirements are met when
performing the first test run.
© Copyright 2015-2020 ABB. All rights reserved.
3.3.6 Inspecting the oil level in axis-6 gearbox
Note
Type of oil and total amount is de-
tailed in Technical reference
manual - Lubrication in gearboxes.
Further information about how to
drain or fill with oil is found in sec-
tion
Changing oil, axis-6 gearbox
on page
Tightening torque: 24 Nm.
3 Maintenance
Continued
163.
117