ABB IRB 8700 Product Manual page 457

3
4
5
Product manual - IRB 8700
3HAC052853-001 Revision: M
Action
Note
Make sure the bearings are axially centered
in the balancing device ears, before putting
them on the shafts.
Make sure that the spacer ring with V-ring
and the support ring are placed correctly
on the shafts before the balancing device
is put on the shafts.
Use caution and put the balancing device
onto upper and lower shafts.
Press the upper and lower part onto the
shafts using the press tool.
© Copyright 2015-2020 ABB. All rights reserved.
4.6.5 Replacing the balancing devices
Note
xx1500002306
xx1500001975
Press tools, balancing device upper end:
3HAC057130-015
Press tools, balancing device lower end:
3HAC057130-015
xx1500002305
Continues on next page
4 Repair
Continued
457