ABB IRB 8700 Product Manual page 142

3 Maintenance
3.4.2 Changing oil, axis-1 gearbox
Continued
3
4
5
6
7
8
Continues on next page
142
Action
Remove the ventilation plug.
Note
The ventilation hole must be opened to let
out air during the filling process.
Remove the base cover.
Pull out the oil hose next to the connections
and attach the nipple. Connect the oil dis-
penser.
Refill the gearbox with oil, by using the oil
dispenser.
Note
The amount of oil to be filled depends on
the amount previously being drained.
Inspect the oil level.
Remove the oil dispenser.
© Copyright 2015-2020 ABB. All rights reserved.
Note
Type of oil and total amount is described
in Technical reference manual - Lubrication
in gearboxes.
See Type and amount of oil in gearboxes
on page 137.
Required oil level: 58 mm ± 5 mm below
the sealing surface of the oil plug.
Product manual - IRB 8700
3HAC052853-001 Revision: M