4 Repair
4.6.1 Replacing the counterweight
Continued
7
8
Refitting the counterweight
Use these procedures to refit the counterweight.
Robot position when refitting the counterweight
1
Continues on next page
416
Action
Use caution, lift the counterweight off.
CAUTION
The counterweight will start to lean back-
wards when laying it down, before it is
resting on the floor.
Action
If not already in this position, turn on the
power and jog to a position where the area
the counterweight is fitted to the parallel
arm, is horizontal to the foundation.
© Copyright 2015-2020 ABB. All rights reserved.
Note
xx1500001982
xx1500002095
Note
xx1500002096
Product manual - IRB 8700
3HAC052853-001 Revision: M