ABB IRB 8700 Product Manual page 611

3
4
5
6
7
Product manual - IRB 8700
3HAC052853-001 Revision: M
Action
Connect the motor cables.
Connect in accordance with the markings
on the connectors.
Inspect the o-ring.
Note
Replace if damaged.
Wipe clean o-ring and o-ring groove.
Refit the o-ring.
Tip
Lubricate the o-ring with some grease for
a better fitting in the groove.
CAUTION
When fitting the motor cover, make sure
that none of the cables inside will be dam-
aged.
© Copyright 2015-2020 ABB. All rights reserved.
4.8.3 Replacing the axis-2 gearbox
Note
xx1200001066
O-ring, axis-1: 3HAC054692-002
O-ring, axis-2: 3HAC054692-002
O-ring, axis-3: 3HAC054692-002
O-ring, axis-4: 3HAC054692-002
xx1200001070
Continues on next page
4 Repair
Continued
611