4 Repair
4.8.2 Replacing the axis-1 gearbox
Continued
6
7
Securing the axis-1 motor
1
2
3
4
Continues on next page
564
Action
Apply flange sealant on the motor flange.
If the motor is a new spare part, remove the cover.
Action
Fit guide pins in opposite holes.
CAUTION
The motor weighs 27 kg.
All lifting accessories used must be sized
accordingly.
Apply the lifting accessory.
Fit the rotation tool.
© Copyright 2015-2020 ABB. All rights reserved.
Note
Flange sealant: Loctite 574
xx1500002357
xx1200001135
Note
Guide pin, M10x150: 3HAC15521-2
Always use guide pins in pairs.
Lifting accessory, motor: 3HAC14459-1.
Rotation tool: 3HAC7887-1
Product manual - IRB 8700
3HAC052853-001 Revision: M