ABB IRB 8700 Product Manual page 64

2 Installation and commissioning
2.3.4 Securing the base plate
Continued
Base plate, locating pins
The illustration below shows the orienting grooves and the locating pins in the
base plate.
xx1700001591
A
Required equipment
Equipment
Base plate
Standard toolkit
Other tools and procedures may
be required. See references to
these procedures in the step-by-
step instructions below.
Base plate
This section details how to secure the base plate to the foundation.
1
2
Continues on next page
64
A
Locating pins (2 pcs)
Action
Make sure the foundation is levelled.
CAUTION
The base plate weighs 760 kg! All lifting ac-
cessories used must be sized accordingly!
© Copyright 2015-2020 ABB. All rights reserved.
Article number Note
3HAC053722- Includes
003 • locating pin, 3HAC051645-001
• hex socket head cap screw,
M5x40
• attachment screws and washers
for securing the robot to the
base plate.
- Content is defined in section
toolkit on page
These procedures include references
to the tools required.
Note
Standard
733.
Product manual - IRB 8700
3HAC052853-001 Revision: M