Toyota Tundra 2005 Service - Repair - Maintenance page 2302

SST
MANUAL TRANSMISSION (RA60)
(c)
(d)
HINT:
Make sure that the ball is fitted into the groove on the reverse
gear bearing inner race.
(e)
D13983
6.
(a)
Groove
HINT:
Make sure that the bearing is installed in the direction shown in
the illustration.
D14002
(b)
D14003
(c)
D13981
− COUNTER GEAR
Install the ball to the counter shaft.
Install the reverse gear to the counter shaft.
Make sure that the gear and synchronizer ring move
smoothly.
INSTALL COUNTER GEAR SHAFT BEARING
Using SST and a press, install a new counter gear shaft
bearing to the counter shaft.
SST 09608−06041
Select a snap ring that allows for the minimum amount of
axial play.
Standard clearance: 0.1 mm (0.0039 in.) or less
Mark
A
B
C
D
E
F
G
H
J
K
L
M
Using a snap ring expander, install the snap ring.
Thickness mm (in.)
2.35 to 2.40 (0.0925 to 0.0945)
2.40 to 2.45 (0.0945 to 0.0965)
2.45 to 2.50 (0.0965 to 0.0984)
2.50 to 2.55 (0.0984 to 0.1004)
2.55 to 2.60 (0.1004 to 0.1024)
2.60 to 2.65 (0.1024 to 0.1043)
2.65 to 2.70 (0.1043 to 0.1063)
2.70 to 2.75 (0.1063 to 0.1083)
2.75 to 2.80 (0.1083 to 0.1102)
2.80 to 2.85 (0.1102 to 0.1122)
2.85 to 2.90 (0.1122 to 0.1142)
2.90 to 2.95 (0.1142 to 0.1161)
MT−59