Domain-Password - Dell S4810 Reference Manual

Hide thumbs Also See for S4810:

Table of Contents

When you execute this command, IS-IS does not download the route to the

routing table if the same route was redistributed into IS-IS routing protocol on the

same router.

domain-password

Set the authentication password for a routing domain.

domain-password [hmac-md5 | encryption-type] password

To disable the password, use the no domain-password command.

No default password.

This guide is platform-specific. For command information about other platforms,

refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version 9.0.2.0

Version 8.3.11.1

Version 6.3.1.0

The domain password is inserted in Level 2 link state PDUs (LSPs), complete

sequence number PDUs (CSNPs), and partial sequence number PDUs (PSNPs).

(OPTIONAL) Enter the keywords hmac-md5 to encrypt the

password using MD5.

(OPTIONAL) Enter 7 to encrypt the password using DES.

Enter an alphanumeric string up to 16 characters long. If you

do not specify an encryption type or hmac-md5

keywords, the password is processed as plain text which

provides limited security.

Introduced on the S6000.

Introduced on the S4820T.

Introduced on the S4810.

Introduced on the Z9000.

Intermediate System to Intermediate System (IS-IS)