Domain-Password - Dell Z9500 Command Reference Manual

Hide thumbs Also See for Z9500:
Table of Contents

Advertisement

Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.5(0.1)
9.0.2.0
8.3.19.0
8.3.12.0
8.3.11.1
7.8.1.0
6.3.1.0
Usage
When you execute this command, IS-IS does not download the route to the
Information
routing table if the same route was redistributed into IS-IS routing protocol on the
same router.

domain-password

Set the authentication password for a routing domain.
Z9500
Syntax
domain-password [hmac-md5 | encryption-type] password
To disable the password, use the no domain-password command.
Parameters
hmac-md5
encryption-
type
password
Defaults
No default password.
Command
ROUTER ISIS
Modes
Intermediate System to Intermediate System (IS-IS)
Description
Introduced on the Z9500.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the S4810.
Introduced on the Z9000.
Added IPv6 ISIS support.
Introduced.
(OPTIONAL) Enter the keywords hmac-md5 to encrypt the
password using MD5.
(OPTIONAL) Enter 7 to encrypt the password using DES.
Enter an alphanumeric string up to 16 characters long. If you
do not specify an encryption type or hmac-md5
keywords, the password is processed as plain text which
provides limited security.
1073

Advertisement

Table of Contents
loading

Table of Contents