Show Ipv6 Dhcp Snooping - Dell Z9500 Command Reference Manual

Command
•
Modes
•
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.7.0
8.3.1.0
7.8.1.0
Related clear ip dhcp snooping
Commands

show ipv6 dhcp snooping

Display the DHCPv6 snooping binding database.
Syntax
show ipv6 dhcp snooping
Defaults none
Command EXEC Privilege
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.7(0.0)
Example
Dell#show
IPv6 DHCP Snooping
IPv6 DHCP Snooping Mac Verification
Database write-delay (In minutes)
DHCP packets information
Snooping packets
Snooping packets processed on L2 vlans
DHCP Binding File Details
Dynamic Host Configuration Protocol (DHCP)
EXEC
EXEC Privilege
Description
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the E-Series.
Introduced on the C-Series and S-Series.
— clears the contents of the DHCP binding table.
Description
Introduced on the S4810, S4820T, S6000 and Z-Series.
ipv6 dhcp snooping
: Enabled.
: Disabled.
: 5
: 0
: 0
737