Connect A Modem, If Necessary; Connecting A Serial Modem - Avaya G350 Installing And Upgrading

a. In the PPP IP Address field, enter the RAS IP address of the modem obtained using
the ART tool. See
address
b. Enter the PPP Subnet Mask.
c. Select the authentication method:
If you have an Avaya Service contract, check Enable ASG Authentication to
●
enable remote access to the device.
If you do not have an Avaya Service contract:
●
- Check Enable CHAP Authentication.
- In the CHAP Secret field, enter the CHAP secret key obtained using the ART
- In the Confirm CHAP Secret field, re-enter the CHAP secret key.
41. Click Continue. The Change Root Password screen appears.
42. If you would like to change the password on the G350 Media Gateway, enter the current
password in the Current Password field, enter a new password in the New Password field,
and re-enter the new password in the Confirm New Password field.
43. Click Continue. The Finish Up screen appears.
Follow the on-screen instructions if you want to save the installation log file. Further
configurations, as described in this screen, can now be performed either remotely, via a
modem that you enabled with GIW, or locally.

Connect a modem, if necessary

If you enabled a serial or USB modem on the G350 during your GIW session, you can now
connect the modem.

Connecting a serial modem

1. Connect the serial modem to a working telephone line.
2. Connect the provided DB-25 adapter to the modem.
3. Disconnect the flat cable from the COM port of the laptop computer.
4. Connect the flat cable to the DB-25 connector on the modem.
Running the Automatic Registration Tool (ART) for the RAS IP
on page 20.
tool. See Running the Automatic Registration Tool (ART) for the RAS IP
address on page 20.
Connect a modem, if necessary
Issue 7 November 2009 143