Table of Contents
Advertisement
4.3. Configure DS3/DS1 Trunking
The following steps describe the administrative procedures for configuring the DS3 and
constituent DS1 trunking between the Avaya G860 Media Gateway and the PSTN.
•
Configuring DS3 and DS1
Step
Description
4.3.1
Administer settings for a DS3 trunk to enable connectivity to the PSTN as
follows:
•
•
•
RJ; Reviewed:
SPOC 3/23/2009
[Not Shown] Double-click on the locked TP6310 board in the Status
pane
Click on the DS3 tab.
From the DS3 Status pane that is displayed, double-click on the DS3
for which the DS1 channel interface parameters are to be defined.
Note: The DS3 Status pane displays the status of each of the 3
DS3 interfaces on this board.
Solution & Interoperability Test Lab Application Notes
©2009 Avaya Inc. All Rights Reserved.
40 of 71
MXS6800SES-G860
Advertisement
Table of Contents
