ES64U SNMP MIB description
...................................................................................................................................................................................................................................
Alarms and events
Trap mechanism
To use the trap mechanism you should use the following features:
Manager list
Define to which IP address and UDP port to send the traps:
You need to use 2 tables: (duplicate tables for future usage of filtering)
•
opticsIMMgrPollingInfoTable
•
tsdimEFDTable
Maximum configured managers is 10.
Alarm profiles
Define profile for specific/group/all sources of alarm to use.
By default there are 4 profiles defined – those defaults can not be edited.
You can define up to 96 new alarm profiles.
Each profile defines the severity for each possible alarm.
For profile definition you need to use 2 tables:
•
tsdimAlarmSevProfileTable
•
tsdimAlarmSevTable
If the severity can not be found within the relevant profile definition, the trap will use a
default (minor).
•
tsdimAlarmSevDefault
By default all sources pointed to profile #2 (=primary alarms)
•
tsdimIfAsapIndex
Open Alarm Table
Show the open alarms table
•
tsdimAPTTable
...................................................................................................................................................................................................................................
365-374-201R11.1.1
Issue 1 March 2010
– general description of the profile
– detailed information of this profile contents
(within
opticsIMIfTable
Alcatel-Lucent – Proprietary
Use pursuant to applicable agreements
Alarms and events
Trap mechanism
)
1-27