Disinfection With Formaldehyde; Clean Exterior Surfaces; Clean Window; Clean The Drain Pan - Thermo Scientific 1300 Series Operating Manual

Section 5
Cleaning and Decontamination
Disinfection with
Formaldehyde
Clean Exterior
Surfaces

Clean Window

Clean the Drain Pan

5-4 1300 Series A2
Warning Decontamination with formaldehyde must be performed in
accordance with the specifications of NSF/ANSI 49, 2004, Annex G. As
this procedure has considerable risks, it must only be performed by
specially trained and authorized service personnel!
Wipe the exterior surfaces of the cabinet using a solution of tepid water
and commercially available mild dishwashing agent. Then, dry all surfaces
using a soft, clean cloth.
For cleaning (and using the wipe disinfection procedure), the window can
be lowered beyond the closing position (Use of the Window, Section 1).
Creating a gap between the light dome and the window's upper edge
ensures that the upper portion of the window can be cleaned and/or
disinfected. Use a commercially available window cleaner to clean the
window.
Clean the drain pan, using a solution of tepid water and commercially
available mild dishwashing agent.
1. Remove the work tray(s) from the chamber.
2. Remove residues and deposits thoroughly.
3. Wipe the drain pan, using a clean cloth and plenty of clean water.
4. Remove the cleaning liquid from the drain pan and dry the surfaces
thoroughly.
Note After cleaning, make sure that all cleaning product has been removed
completely from the drain pan.
5. Re-install the work tray.
▲
▲
Thermo Scientific