Inter-Tel AXXESS Manual page 1082

Programming
® ®
INTER-TEL AXXESS
4.297 To delete destinations from the list: To delete an item from the list, highlight them and
then right-click. Select
It shall be the responsibility of the entity or person(s) completing installation and mainte-
nance of hardware or software described herein to research, comply with and be responsi-
ble for the specific governmental rules and regulations regarding Emergency Outgoing
Access 911 [999] of the geographic location in which such functions are performed.
Day/Night Outgoing Access
4.298 There are separate lists for stations with outgoing access in day and night modes. (On
loop start trunks that are connected to paging equipment, the outgoing access designation does
not affect stations' ability to seize the trunk for paging. Trunks used for paging should not
allow any station to have outgoing access for placing outside calls.) By default, the automatic
station list (Auto: All Stations) is assigned to Day/Night Outgoing Access when a CO Trunk
Group is created. To program the stations that will have outgoing access for the trunk group,
select
4.299 To add extensions to the list:
1.
2.
3.
4.
4.300 To delete destinations from the list: To delete an item from the list, highlight them and
then right-click. Select
Toll Restriction
4.301 To program toll restriction for the trunk group, double-click on
trunk group can have the following toll restriction parameters programmed.
NOTE:
affect stations' ability to seize the trunk for paging.
•
Page 6-232
MANUAL VERSION 11.0 – May 2008
Remove Selected Items
and then
Outgoing Access
Right-click anywhere in the right side of the window. An option box appears.
Select . A window appears that asks you to select the type of device to
Add To List
include.
Select the device type(s) and then select
list by selecting the List button or view details by selecting the Details button.)
NOTE:
To highlight a series of items, hold down SHIFT while selecting the first and last
items you want. To highlight two or more items that are not consecutive, hold down
CTRL while selecting the desired items.
Highlight the appropriate items and then select
the desired devices select
NOTE:
If you want to see the programming for a specific item, double-click on its
extension number to jump to its programming area.
Remove Selected Items
On loop start trunks that are connected to paging equipment, toll restriction does not
Class Of Service: Each trunk group has Classes of Service (COS) which restrict or
allow certain dialing patterns from being dialed on a call.
.
NOTICE
or
Day Mode Night Mode
. A list appears. (You can view them in a
Next
Add Items
. Your selections appear in the list.
Finish
.
and do the following:
. When you have added all
Toll Restriction
CO Trunk Groups
. Each