Inter-Tel AXXESS Manual page 1290

Hide thumbs Also See for AXXESS:

Table of Contents

Troubleshooting

Card Light-Emitting Diode (LED) Indications (Continued)

(Continued) T1/E1

Cards (T1C, T1/PRI,

E1/PRI, or T1/E1/

Options Card

Card On-Line

Circuit Busy

MANUAL VERSION 11.0 – May 2008

Lit yellow to indicate that the card is in the process of "busying out"

each circuit. This occurs when someone presses the Make Busy

switch. After the circuits are busied out, this LED flashes slowly. If

flashing rapidly, the busy out process was canceled because the

Busyout Switch Timeout timer expired before the card was removed.

If this happens, the LED continues to flash until the Make Busy

switch is released or the Make Busy field is disabled (System\Cabi-

nets\<T1 Card>\T1 Diagnostics\T1 Status or System\Cabinets\<E1

Card>\E1 Diagnostics\E1 Status).

Lit green to show functional readiness (e.g., the card is communicat-

ing properly with the rest of the system). If unlit, check for improper

connection; if still unlit, try another card or another card slot.

Lit yellow to indicate that at least one of the card's resources is busy.

Unlit when all the resources are idle.

Circuit Card LEDs

Chapters

Table of Contents