Inter-Tel AXXESS Manual page 1161

Hide thumbs Also See for AXXESS:
Table of Contents

Advertisement

NOTE:
when used with versions 3.0-6.x system software. See
10.32 When you double-click on a specific Keyset keymap, you have the following options:
Keyset Map: Double-click on
type. The Executive Display Phone is shown in the example below.
Key Assignments
INTER-TEL
There are certain limitations associated with the Model 8500, 8520, and 8560 Phones
To change a button requiring additional information (feature code, extension num-
ber, etc.), click on the button for which you want to assign a new value. Then use
the Key Type drop-down box to scroll to the desired key type. To assign the addi-
tional information (e.g., extension, hunt group, etc.), click on the button again. A
window with a list of device types appears. Select the device type from the drop-
down box, and select
Next
select
. The new value will appear in the box below the Key Type drop-
Finish
down box.
To change all other buttons, click on the button for which you want to assign a
new value. Then use the Key Type drop-down box to scroll to the desired button
type. If you change the button type to one requiring additional assignments (e.g.,
extension, hunt group, etc.), any previously programmed information for that but-
ton type will remain. To change this information, you must click on the button
again and follow the directions detailed above.
NOTE:
Secondary extension buttons also have an additional field, "Ring When _
Calls At Extension, as shown above. This field allows the station to receive a burst
of ringing when a certain number of calls are present at a primary station, and at
least one call is ringing or camped on. If this field is set to 0, the secondary station
will never receive the burst of ringing. To set this number, select the current Value
and scroll to or enter the new value in the box. Then press ENTER or select
another field to save the change.
®
®
AXXESS
MANUAL VERSION 11.0 – May 2008
page 5-135
for details.
to view an illustration of the selected phone
Keyset Map
. Highlight the desired value from the available list, and
Programming
Page 6-311
6

Advertisement

Table of Contents
loading

Table of Contents