Inter-Tel AXXESS Manual page 1354

Troubleshooting
® ®
INTER-TEL AXXESS
7.10 To use a serial interface via a Telnet connection:
1.
2.
3.
Page 7-74
MANUAL VERSION 11.0 – May 2008
Make sure the IPRC is connected and online.
Establish a Telnet connection to the IPRC's IP address using a Telnet program (such as
the Microsoft Windows Telnet program) on a PC configured to run the IPRC's subnet.
A Telnet page similar to the one shown below appears.
At the prompt, enter the IPRC's password and press
appears.
NOTE:
The password is case-sensitive.
. The following page
ENTER
Serial Interface