Inter-Tel AXXESS Manual page 1497

2. CPC
2.1 This section describes the CPCs.
A. SPECIFICATION
2.2 Version 8.0 and later software support a new CPU card called the Call Processing Card
(CPC). This card, which replaces the CPU64, CPU128, and CPU256 cards, uses a software
license that allows you to upgrade the capacity of the system without having to replace the card
(see page 5-11
contains premium feature information, the CPC or CPU020 cards do not require a feature unit
PAL. In addition, the CPC does not require an attached PCM card because the CPC houses the
typical PCM functionality and hardware. See
NOTE:
(CP) Server (Windows NT- or 2000-based CPU) is required. To use version 8.0 or later software
on 64, 128, or 256 systems, the CPC is required.
2.3 Features of the CPC include the following:
•
IP Port (10/100 Base-T): Provides IP connections directly to the system, which is sim-
ilar to the functionality of the IP port found on the CP Server. In addition, you can use
the IP Port to upload Call Processing software, upload the software license, or program
the database. See
•
* Button: Allows you to bypass the backup database, verify the status of Call Process-
ing, and place the CPC into the download state. See for details.
NOTE:
•
RS232 Jacks: (two 8-pin, 8-conductor modular jacks) Connects to the RS232 port on
the Voice Processing PC or EVMC, or connects SMDR/error message output devices, a
personal computer for programming the system database, and/or a modem for remote
programming/maintenance (see
NOTE:
includes the RS232 ports on the CPC, Options Card(s), and PC Data Port Modules. If
an Inter-Tel Voice Processing PC or EVMC is installed, at least one of the system
RS232 ports must be dedicated to Voice Processing.
CPC
INTER-TEL
for details about the software license feature). Because this software license
To use version 8.0 or later software on 512 and higher systems, a Call Processing
page 6-178 for more information.
Security is the responsibility of the customer's network administrator. Inter-Tel is not
responsible for network problems due to security violations involving the IP address
exposure of the CPC. This includes, but is not limited to, interrupted network service.
Recommendations remain to place the CPC in a private IP network. In addition,
Inter-Tel recommends that you install the CPC behind a firewall or Network Address
Translation (NAT) box.
The * button is not a reset button.
The system can have a maximum of 32 RS232 ports for system services. This
Appendix D — CPC64/CPU64 Configuration
® ®
AXXESS MANUAL VERSION 11.0 – May 2008
Figure 3-47 on page 3-96
CAUTION
pages 2-99 to 2-104 for requirements).
for an illustration.
Page D-7