Inter-Tel AXXESS Manual page 1042

Hide thumbs Also See for AXXESS:

Table of Contents

Search Algorithm

4.147 A search algorithm determines whether the node trunk groups are accessed in linear or

distributed order. Set the search algorithm by selecting current Value and then using the drop-

down list box to scroll to the desired option. The options are:

and when to use Linear or Distributed search type depends on the system configuration and

traffic. For example, if the Node Trunk or IP Connection Group List has more than one trunk

group that connects to the same node, you should use the Linear instead of Distributed search

Audio for Calls Camped onto this Device

4.148 The Audio for Calls Camped onto this Device field defines the audio that a caller hears

when camped-on to this node trunk or IP connection group. To program this field, use the

drop-down list to select the type of audio and press

tone, Ringback, or Board. If you select

field. The default is Board, and the default extended value is 01:08 Central Processor.

MANUAL VERSION 11.0 – May 2008

Linear: The system first attempts to route a call through the first node trunk group

listed. If it is unable to route through that node trunk group, it attempts to route the call

through the second node trunk group in the node. The system continues to attempt to

route the call through the subsequent node trunk groups listed in the node until it suc-

cessfully routes the call or exhausts all node trunk groups in the list.

Distributed: The system shifts the first node trunk group it attempts to use with each

call. For example, if the system routed the first call through the first node trunk group in

the node, it routes the second call through the second node trunk group in the node.

Determining in what order to list the Node Trunk or IP Connection Groups in a node

Appendix A — Networking

for details.

. Your options are Silence, Tick-

, specify the music source in the Extended Value

Remote Nodes

Chapters

Table of Contents