Inter-Tel AXXESS Manual page 1481

24. INTER-TEL CALL PROCESSING SERVICE UPDATE
24.1 To update the Inter-Tel Call Processing service, if necessary:
Perform a database save.
1.
NOTE:
information is necessary, perform a system freeze prior to stopping the service. The
freeze will have the latest exception and reset log data in it. Copy those files for safe-
keeping.
Install the new software.
2.
Set the Software Watchdog service to "automatic."
3.
Perform a database restore.
4.
25. INSTALL INTER-TEL CP SERVER SOFTWARE
NOTE:
25.1 To install Inter-Tel CP Server software:
Run the setup file located in the CP Server PC Software folder.
1.
Install the software to the default location (C:\ICP).
2.
NOTE:
If you plan on using SNMP, review the SNMP section of this document (see
3.
prior to selecting
tinue. (You can add the SNMP option later by re-installing the Inter-Tel CP Server soft-
ware.)
Select either
4.
ware device, if using a PC supplied by Inter-Tel. If using a customer-provided PC,
choose the appropriate device.
Set the listening socket to
5.
value allows listening on the installed NIC(s).
Inter-Tel Call Processing Service Update
INTER-TEL
Reset and exception log data are lost between updates. If maintaining this
When the software is installed or upgraded, the Software Watchdog service is set
for "manual" startup by default. It is very important for you to change the startup
type to "automatic" after the new software is installed and is working properly.
Installation software is included on the Inter-Tel CP Server CD-ROM.
If the C: drive is not formatted, cancel the installation and format the drive.
when prompted to install SNMP. Otherwise, select
Yes
or
AIC card PCI Watchdog
0.0.0.0
Appendix C — CP Server
® ®
AXXESS MANUAL VERSION 11.0 – May 2008
CAUTION
when prompted to select the watchdog hard-
while in the ICP Configuration Utility screen. This
page C-40)
to con-
No
Page C-33