Inter-Tel AXXESS Manual page 1240

Programming
® ®
INTER-TEL AXXESS
NOTE:
Dial-0 Destination Type and Dial-0 Destination
4.109 Each mailbox is assigned an operator destination. When a caller presses 0 while listen-
ing to the mailbox's personal greeting or recording instructions, or while recording a non-sub-
scriber message, the operator destination is called. First select the desired extension type by
scrolling through the Dial-0 Destination Type drop-down list box to the appropriate type. The
options are: Extension, Mailbox, Operator, and None. If Extension or Mailbox is selected,
scroll through the Dial-0 Destination drop-down list box to the desired destination. The Dial-0
Destination can be one of the following types:
•
•
•
•
•
Remote Messaging
4.110 To enable remote messaging, select this check box to place a check mark in it. Then
press
select it again to remove the check mark.
NOTE:
(see
appears.
Mailbox Initialized
4.111 This field indicates whether the subscriber (mailbox owner) has initialized the mailbox
and recorded a name in the company directory. This is shown for reference only and is not pro-
grammable.
Receive Only
4.112 The mailbox can be programmed as a standard mailbox that can send and receive mes-
sages or it can be a "receive only" mailbox. (In the default state, it is a standard mailbox.) To
make the mailbox receive-only select the check box to place a mark in it and change the setting
to
Yes
mark, select the checkbox again.
Page 6-390
MANUAL VERSION 11.0 – May 2008
To edit existing e-mail reader profiles, double-click the profile ID.
Mailbox: If the operator is a mailbox, the caller will hear the operator destination's per-
sonal greeting after pressing 0.
Extension number of a station or a hunt group (including off-node devices): If the
operator destination is a station's extension number, the caller will hear the Automated
Attendant transfer prompt while the call is placed to the extension number ("Please
hold while I transfer your call to..."), unless it has been disabled at the mailbox. If the
station user does not answer the caller will be asked if he wants to leave a message if
the operator's extension has an associated mailbox. If the caller chooses not to leave a
message, the call returns to the mail menu of the application being used (Call Routing
Announcement, Voice Mail, or Auto Attendant.
Extension number of an application: If the operator destination is an application's
extension number, the call is transferred to that application's main menu.
Operator: If the operator destination is set to
the attendant.
None: If the operator destination is set to
or click on another field to save your change. To disable remote messaging,
ENTER
You cannot enable remote messaging unless you have programmed cascade levels
page 6-386). If you try to enable remote messaging without any cascade levels, an error
. Then press or click on another field to save your change. To remove the check
ENTER
, the caller will be transferred to
Operator
, the 0 will be ignored.
None
Mailbox Programming