Inter-Tel AXXESS Manual page 1125

8.29 Select the output port and backup port for the message print reports, using one of the
following methods:
Method A
Select the current Value and enter the new value in the text box.
1.
Press
2.
entered.
Select
3.
Method B
Right-click on the existing port. An option box appears.
1.
Select
2.
include.
Select
3.
ports or nodes appears. (You can view them in a list by selecting the List button or view
details by selecting the Details button.)
Highlight the desired port and then select
4.
priate port field.
NOTE:
print output (such as PP100, PP101, etc.). This may cause the serial port to lock up and the
Voice Processor will not be connected to the port.
8.30 Message Print Output Active: To activate the error/message reporting feature, enable
the Message Output Active flag. To enable the flag, select the current Value and then select the
check box to place a check in it. Then press
(To remove the check and disable the flag, select the check box again.)
8.31 Output Device Line Width: To indicate whether the output device has 64, 80 or 132
character columns, select current Value and scroll to the desired column width. Then press
ENTER
8.32 Print Options: These flags determine the types of error messages to be included in the
error report. To enable a flag, select the current Value and then select the check box to place a
check in it. Then press
and disable the flag, select the check box again.) The message types are described on the pre-
ceding page.
Message Print
INTER-TEL
. A screen appears showing you what is associated with the number you
ENTER
. The new number appears in the field.
OK
. A window appears that asks you to select the type of device to
Change Port
, , or
None Remote Node
Do not connect a Voice Processor to a serial port that is programmed for message
or click outside the field to save the change.
or select another field to save the change. (To remove the check
ENTER
® ®
AXXESS MANUAL VERSION 11.0 – May 2008
and then select
Serial Port (local)
. Your selection appears in the appro-
Finish
or select another field to save the change.
ENTER
Programming
. The list of
Next
Page 6-275
6