Inter-Tel AXXESS Manual page 765

Do one of the following:
3.
Hang up to exit. Repeat these steps for each additional number to be stored.
4.
Viewing Station Speed-Dial Numbers
38.24 To view the contents of a speed-dial button (on a display phone):
While on hook, enter the Review Keys feature code (396). The display shows PRESS
1.
THE KEY TO REVIEW. Press the desired speed-dial button. The display shows the
currently stored number and name.
After viewing the number, press the Speaker button,
2.
display to return to date and time.
38.25 To view the stored numbers and names (on a display phone):
While on hook, enter the Program Station Speed Dial feature code (383). The display
1.
shows PROGRAM STN SPD # (0-9) OR SCROLL. Do one of the following:
After viewing the number, press the Speaker button,
2.
display to return to date and time.
Dialing Station Speed-Dial Numbers
38.26 To dial a station speed-dial number at a single-line set:
Lift the handset. (Phones can remain on hook.)
1.
If placing an outside call, select an outgoing trunk or use ARS.
2.
If placing an intercom call or if the outside number contains a trunk access code, skip
this step.
Hookflash (press
3.
hear a confirmation tone. Then dial the location code (0-9). The number is dialed.
Viewing Station Speed-Dial Numbers
INTER-TEL
To enter or change a number: Dial the extension number or telephone number
(up to 16 digits, including pauses and hookflashes/recalls) to be stored. To include
*, #, a hookflash (recall), or a pause in the number, hookflash (recall) once for an
asterisk (*), twice for a pound [hash] (#), three times for a hookflash (recall), or
four times for a pause. If you make a mistake, press
unchanged; then start over at step 1.
To erase an existing number and leave it blank: Overwrite the existing number
by entering only a hookflash (recall) as the new number.
•
Use a Location Code: Dial the desired speed-dial location code (0-9). When the
name appeared, press
#
•
Scroll through the Displayed Numbers: Scroll to the desired number by pressing
the , , or
VOLUME NEXT
for each location.
•
Use the Menu Buttons: Use the menu buttons to select the desired speed-dial
location. When the name appeared, press
) and enter the Station Speed-Dial feature code (382). You
RECALL
® ®
AXXESS MANUAL VERSION 11.0 – May 2008
, or
or to view the number.
ACCEPT
button. The name and number are displayed
PREVIOUS
or
ACCEPT
#
, or
System Features
to leave the number
to exit, or wait for the
#
to view the number.
to exit, or wait for the
#
Page 5-239
5