Report Programming - Inter-Tel AXXESS Manual

13. REPORT PROGRAMMING

13.1 Customized system programming reports can be created through the database. You can
select the programming area to be reported and then select the information that will be
included. The report types and their options include the following.
•
ARS Facility Group Report: This report lists the facility groups and their dial rules
and/or trunk groups/nodes.
•
ARS Route Group Report: This route group list can include dial patterns and/or facil-
ity groups.
•
Call Routing Report: This report shows the call routing tables.
•
Class of Service Report: This report can include the day/night lists of stations and the
dial patterns for each class of service.
•
CO Trunk Groups Report: This trunk group list can include day/night answer access,
day/night outgoing access, day/night emergency outgoing access, day/night ring in, toll
restriction, and/or trunk lists.
•
Detailed Station Report: Selected stations are listed with account codes, mailboxes,
flags, port, station-related information, programmable buttons, special purpose station
status, system forwarding, toll restriction, and/or voice mail information.
•
E1 Report: This report shows information for selected E1/PRI Cards, including error
statistics, error thresholds, flags, primary rate timers, and/or reference clock informa-
tion.
•
General Station Report: Selected stations can be listed by attendant, class of service,
equipment, and/or special purpose station status.
•
Hunt Group Report: Selected hunt groups are listed with their agent/member lists,
supervisors, and/or timers.
•
Individual Trunk Reports: Selected trunks are listed with their answer supervision
setting, connect trunk-to-trunk call on polarity reversal, disconnect timer, DTMF signal-
ing information, hybrid balance setting, language, loop current dial tone detection, num-
ber of digits to receive, base number, service type, start type, and/or trunk group.
•
Keymaps Report: Selected keyset and DSS map groups and map diagrams are listed
with their button assignments and/or station lists.
•
Off-Node Devices: Lists of devices can include off-node applications, modems, IP con-
nections, hunt groups, paging ports, paging zones, phones, and/or single-line sets.
•
Phone List: Selected stations, hunt groups, and page zones are listed.
•
Station Flags: Stations with the flag enabled are listed for selected station flags.
•
System Speed Dial Report: Selected system speed-dial numbers are listed.
•
System Timers Report: Selected system timers are listed.
•
T1 Report: This report shows information for selected T1 Cards, including error statis-
tics, error thresholds, flags, primary rate timers, and/or reference clock information.
•
User Group Report (U.S. only): Selected user groups are listed with day/night lists of
stations, allowed area and office codes, restricted area and office codes, and/or extended
area codes.

Report Programming

® ®
INTER-TEL AXXESS MANUAL VERSION 11.0 – May 2008
Programming
Page 6-339
6