Sending And Receiving Network Alarms; Clearing Network Alarms - Inter-Tel AXXESS Manual

Hide thumbs Also See for AXXESS:

Table of Contents

Appendix A — Networking

8. NETWORK-WIDE ALARMS

alarms and network-wide alarms:

A. SENDING AND RECEIVING NETWORK ALARMS

network-wide alarms.

on administrator phones preceded by "NET ALARM" and local system alarms are preceded

with "SYS ALARM."

alarm occurred. The node name is obtained from the node username.

B. CLEARING NETWORK ALARMS

node in the network.

MANUAL VERSION 11.0 – May 2008

To allow one administrator to monitor multiple nodes, the system provides both system

Network-Wide Alarms: When an event occurs that generates a network-wide alarm,

the alarm is broadcast to every node in the system.

System Alarms: System alarms appear only on the node on which the alarm was gen-

Each node has two system flags that determine whether the node broadcasts or receives

The Send Network Alarms flag determines whether a node will broadcast alarms that

occur on that node to the rest of the network.

The Receive Network Alarms flag determines whether the node will receive and dis-

play alarms sent by other nodes in the network.

To differentiate between network-wide and local alarms, network-wide alarms appear

On remote nodes, network-wide alarms will indicate the name of the node on which the

An administrator can clear a network-wide alarm on the local node only or on every

Clear Network Alarm (9851): This feature code clears network-wide alarms on every

node in the network, but will not affect system alarms. The Clear Network Alarm fea-

ture code may be entered on any node in the network, but the Send Network Alarms

flag must be set for the administrator to clear alarms on other nodes in the network.

Clear System Alarm (9850): This feature code clears all local and network-wide sys-

tem alarm displays on your node.

Network-wide alarms will override system alarms on an administrator's phone display.

Network-Wide Alarms

Chapters

Table of Contents