Inter-Tel AXXESS Manual page 1158

Programming
® ®
INTER-TEL AXXESS
•
•
10.26 Key Assignment Programming: When you select Key Assignments, the right screen
shows the DSS and Keyset Options.
•
•
•
10.27 Keyset keymap #1 is used as a template for any new keyset keymaps that are created.
This keymap is used regardless of the type of keymap selected. For example, if keymap #1 is
an Executive Display keymap with the default Hold button programmed as a Forward button,
any newly created keymaps that have a Hold button, even Standard Display keymaps, will
reflect this change. Because keymap #1 is used as a template, do not change this keymap. The
DSS keymaps do not use a template.
10.28 To add a keymap to the list, right-click on the list and select
. A dialog box appears. Select the Starting ID and the number of keymaps (IDs) to add.
List
When you click
NOTE:
error message appears, and the requested keymaps are not added.
10.29 After you have added keymaps, you can assign a new description to any of the keymaps
by selecting the current description and typing the new information (up to 20 characters) in the
text box. Then press
10.30 DSS or IDS DSS: When you double-click a specific DSS or IDS DSS keymap, you
have the following options:
Page 6-308
MANUAL VERSION 11.0 – May 2008
Users who have Standard and Alternate keymaps will want to have their user-program-
mable buttons in the same positions in both keymaps. That way their user-programma-
ble button locations do not change when they switch keymaps. Also, if a fixed feature
button is created for the Switch Keymap feature code, it should be in the same position
in both keymaps.
The volume adjustment button on the digital phones also can be used for scrolling
through displays. The analog phone volume buttons are used only for adjusting volume;
they need to have Up/Down or Previous/Next buttons programmed in their keymaps to
scroll through displays. They also should have an Accept button to accept entries when
in numeric programming mode.
When you double-click on
maps can be programmed for DSS Units.
When you double-click on
keymaps can be programmed for phones.
NOTE:
A CP Server (1024) or ATM system is required to support 250 keyset keymaps.
When you double-click
IDS DSS
maps can be programmed for Executone IDS DSS Units.
, the keymaps are automatically added.
OK
If the Number of IDs value results in exceeding the maximum number of keymaps, an
or select another field to save the change.
ENTER
, a list that includes keymap #1 appears. Up to 20 key-
DSS
, a list that includes keymap #1 appears. Up to 250
Keysets
, a list that includes keymap #1 appears. Up to 30 key-
Add To DSS (or Keyset)
Key Assignments