Keyset Db Programming Password - Inter-Tel AXXESS Manual

Hide thumbs Also See for AXXESS:

Table of Contents

K. KEYSET DB PROGRAMMING PASSWORD

10.58 This password is used by the Administrator stations when programming through a

phone. It can consist of only digits. See FEATURES,

10.59 To program the password right-click on

dow appears as shown below. Then do the following:

Keyset DB Programming should have a password. To make the passwords difficult to guess,

they should not consist of one digit repeated several times. The password should be changed

periodically.

MANUAL VERSION 11.0 – May 2008

Enter the old password, if one exists, in the Old Password box.

Enter the new password (up to 8 digits, using digits 0-9) in the New Password box. The

digits will not appear on the screen when typed; they will appear as asterisks (***).

Retype the password exactly as before in the Confirm Password box.

to exit and save the password. If the entered passwords match, you will

return to the Password field. If not, you must re-enter the new password and verify it

again. If you make a mistake while entering the password or want to leave it

unchanged, select

To provide system security and prevent unauthorized access to the system database,

Keyset DB Programming Password

for details.

Table of Contents