Inter-Tel AXXESS Manual page 802

System Features
® ®
INTER-TEL AXXESS
E. SYNCHRONIZE NETWORK TIME
52.15 Administrators can synchronize the minutes past the hour across the network without
changing the hour. This is useful when the nodes are in different time zones.
52.16 If the node is an ATM-based system, the individual chassis-pairs cannot span different
time zones because there is no way to synchronize the time of the dual chassis connected to the
ATM Switch.
NOTE:
the hour to change. Also, network time is automatically synchronized every day at 12:30 AM
(00:30), using the time setting on the node with the lowest number.
52.17 An Administrator can synchronize the clocks in all nodes in the network using the fol-
lowing procedure.
52.18 To synchronize network time:
F. DB PROGRAMMING
52.19 Any Administrator station can perform DB Programming using the phone. However, it
requires a display phone, and an Executive Display, Professional Display, or Model 8560
Phone is strongly recommended.
NOTE:
UP/DOWN buttons in place of the Volume button in the instructions in this section.
52.20 The database areas that can be programmed by an Administrator station include the fol-
lowing:
52.21 Station Programming:
•
•
•
•
•
•
52.22 System Option Programming:
•
•
•
•
52.23 Trunk Programming:
•
•
Page 5-276
MANUAL VERSION 11.0 – May 2008
If a node's time is off by more than 30 minutes, synchronizing the minutes may cause
While on hook, enter the Synchronize Network Time feature code (9811). You hear a
confirmation tone, and the display shows NETWORK TIME SYNCHRONIZED.
If using an analog phone, the Administrator will need to use the PREVIOUS/NEXT or
Create or delete Administrator stations
Create or delete Attendant stations
Create or delete House Phones
Assign stations to Attendants
Program usernames
Program station toll restriction
Program do-not-disturb messages
Program a password for the DB Programming feature
Program station extensions
Swap extensions
Individual trunk answer supervision type, caller information, hybrid balance, signaling
type (DTMF or pulse), and trunk group assignment
Trunk group answer access, ring-in, toll restrictions, and trunk lists
Synchronize Network Time