Inter-Tel AXXESS Manual page 670

System Features
® ®
INTER-TEL AXXESS
NOTE:
through displays. The analog phone and Executone IDS and Wave Phone volume buttons are
used only for adjusting volume; they need to have PREVIOUS and NEXT buttons programmed
in their keymaps to scroll through displays. For information about programming the analog
phones and Executone phones, see a version 7.0 or earlier Installation and Maintenance Man-
ual.
12.91 To change volumes on a digital phone:
1.
Page 5-144
MANUAL VERSION 11.0 – May 2008
The volume adjustment button on the digital phones can also be used for scrolling
Press the appropriate button to raise or lower the volume, using one of the procedures
listed below. A confirmation tone will alert you when you have reached the highest or
lowest possible volume. On display phones, the display shows VOLUME LEVEL X.
The "X" represents the level and changes as the volume is raised or lowered.
— To change handset intercom voice volume: Adjust the volume while on an off-
hook (handset) intercom call.
— To change handsfree intercom voice and paging volume: Adjust the volume
while on an on-hook (speakerphone) intercom call.
— To change handset outside call voice volume: Adjust the volume while on an
off-hook (handset) outside call.
— To change handsfree outside call voice volume: Adjust the volume while on an
on-hook (speakerphone) outside call.
— To change headset intercom voice volume: (Model 8520 and 8560 Phones Only)
Adjust the volume while using the headset and on an intercom call.
— To change headset outside call voice volume: (Model 8520 and 8560 Phones
Only) Adjust the volume while using the headset and on an outside call.
— To change background music volume: Adjust the volume while listening to
music through the phone speaker.
NOTE:
The selected background music volume level is automatically saved.
— To change alerting tone (ring tone) volume: Adjust the volume while the phone
is ringing or idle. Or, while on hook, press both edges of the Volume button on a
digital phone or the pound (hash) button (
rently programmed volume, then adjust it up or down.
NOTE:
The selected alert tone volume level is automatically saved.
— To change handset progress tone volume: Press the desired end of the Volume
button while listening to intercom dial tone through the handset.
— To change speakerphone progress tone volume: Press the desired end of the
Volume button while listening to intercom dial tone through the speakerphone.
) on all other phones to hear the cur-
#
Volume Controls