Inter-Tel AXXESS Manual page 1059

Highlight the DSS Consoles you want to use and then select
4.
have added all the Consoles necessary (up to 3), select
the list.
NOTE:
extension number to jump to its programming area.
4.229 To delete DSS Consoles: To delete one or more item from the list, highlight them and
right-click. Select
Emergency Calling Party Number
4.230 This field allows subscribers to specify the Caller ID [CLID] to use when an endpoint
makes an outgoing emergency call. Call Processing propagates the appropriate calling party
number/name to the PSTN.
4.231 To program the Emergency Calling Party Number for a station:
Select the current Value in the Emergency Calling Party Number field, and then type
1.
the number (up to 48 numeric characters) in the text box.
Press
2.
Flags
4.232 You can enable a flag by selecting the current Value and then selecting the check box to
place a check in it. Then press
the check and disable the flag, select the check box again.) Some flags require you to choose
between two setting (such as Hunt Group Remove/Replace). For those flags, select the current
Value and use the scroll box to select the desired value. Then press
field to save your change. The station flags that can be programmed include the following:
•
Administrator: (Inter-Tel phones only) A station can be assigned as an administrator to
permit use of the administrator feature codes at that station. To assign the station as an
administrator, enable this flag.
•
All Transient Displays: (Inter-Tel phones only) When this flag is enabled, it will allow
all transient call handling displays to appear on the phone display. If it is disabled, the
CALL TRANSFERRED TO XXX and MESSAGE LEFT FOR XXX displays will not
appear. In the default state it is enabled.
•
Alternate Hold Timer: For users' convenience, the system has two Hold timers: Hold
and Hold - Alternate. In the default state, the Alternate timer is set for a longer time
period than the Hold timer. However, both timers are programmable. The "Alternate
Hold Timer" station flag determines which timer each station will use. If the flag is dis-
abled, the station uses the Hold timer. If it is enabled, the station uses the Alternate
timer. In the default state, the flag is disabled.
•
Alternate Keymap: (Inter-Tel phones only) If an alternate keymap will be used on the
phone, it can be enabled through programming or by the phone user. This flag shows
the current state of the alternate keymap (enabled or disabled). In the default state, the
alternate keymap is disabled and the standard keymap is used. (The phone user can
switch keymaps at any time by entering a feature code.)
•
Attendant: A station can be designated as an attendant. It will then appear in the list of
available stations when you are assigning Associated Extensions for other stations. If
you attempt to remove attendant status from the primary attendant, you will see a warn-
ing message. (The primary attendant can only be changed using the programming fields
described on
Stations on the Local Node
®
INTER-TEL AXXESS
If you want to see the programming for a specific item, double-click on its
Remove Selected Items
or select another field to save the change.
ENTER
or select another field to save the change. (To remove
ENTER
page 6-315.)
®
MANUAL VERSION 11.0 – May 2008
Add Items
. Your selections appear in
Finish
.
ENTER
Programming
. When you
or select another
Page 6-209
6