Digit Translation Nodes - Inter-Tel AXXESS Manual

•
Days of the Week: If the Specific Date field is set to
determine which days of the week the schedule will be active. To enable a specific day,
select its check box to place a mark in it and change the setting to
day, select the check box again to remove the mark and set it to
or click on another field to save the changes.
•
Specific Times: If you want the schedule to be active for a specific period of time on
the selected day(s), enable this flag. To enable this flag, select the check box to place a
check in it and change the setting to
remove the check mark and set it to
save the changes
•
Start and Stop Time: If the Specific Time field is set to
period that this schedule will be active (such as a after hours). Enter the time you want
the schedule to begin in the Start Time text box and the time you want it to end in the
Stop Time text box. After entering information, press
to save the changes.
•
Day/Night Mode: If the Specific Time field is set to
mine whether the schedule will be active in day and/or night mode. To change this field,
select the drop-down list box and scroll to the desired setting. Then press
click on another field to save the change.
B. DIGIT TRANSLATION NODES
4.53 Each digit translation node can be used in one or more Call Routing Announcement
application. This allows entire digit translation node trees to be shared or moved without repro-
gramming.
4.54 There can be up to 200 digit translations in the system. Each digit translation can have
its own description, username, digit translation programming, and greetings. The digit transla-
tion node is assigned as a destination for a digit translation "Transfer To Node" Action (see
page 6-361).
4.55 A digit translation node can only be deleted if it is not associated with a Call Routing
Announcement application.
4.56 Digit translation node programming is very similar to that for a Call Routing
Announcement application. The programming fields are described in detail below.
4.57 Description: Enter a description of up to 20 characters in the Description text box. This
description is used in the mailbox directory and should be entered in the form "last name, first
name" (with a comma and space separating the names). Do not use Control characters in
descriptions.
4.58 Digit Translation Nodes programming includes the following folders:
•
Digit Translation (see below)
•
Day and Night Greetings (see below)
Digit Translation
4.59 Digit translation allows callers to dial a single digit to select a designated extension
number, mailbox, modem, or hunt group pilot number. Digit translation can be programmed
for each digit 0-9, #, and *, plus a Timeout that is used when the caller does not enter a digit.
Each digit can lead to another "digit translation node" that has its own digit translation actions.
This layered Call Routing Announcement digit translation creates a "tree" of programmable
digit translation nodes. For a detailed explanation of Call Routing Announcement digit transla-
tion nodes and a sample tree, see

Digit Translation Nodes

® ®
INTER-TEL AXXESS MANUAL VERSION 11.0 – May 2008
. To disable it, select the check box again to
Yes
. Then press
No
page 4-21 in VOICE PROCESSING FEATURES.
Programming
, you can use these fields to
No
. To disable the
Yes
. Then press
No ENTER
or click on another field to
ENTER
, use these fields to set time
Yes
or click on another field
ENTER
, you can use this field to deter-
No
ENTER
Page 6-371
or
6