Inter-Tel AXXESS Manual page 1132

Programming
® ®
INTER-TEL AXXESS
•
•
•
•
•
•
For European Systems:
•
•
•
•
Page 6-282
MANUAL VERSION 11.0 – May 2008
COS 04 – Deny Toll Access: Calls to numbers that match the dial patterns for this class
of service (defaults to [Q]TN+ and [Q]TE) are restricted, unless the number also
matches a dial pattern in an "allowed" class of service that is assigned to the station,
Voice Processing application, or trunk group being used.
COS 05 – Deny International: Calls to numbers that match the dial patterns for this
class of service (defaults to [Q]I+) are restricted, unless the number also matches a dial
pattern in an "allowed" class of service that is assigned to the station, Voice Processing
application, or trunk group being used.
COS 06 – Deny Equal Access: Calls to numbers that match the dial patterns for this
class of service (defaults to Q+) are restricted, unless the number also matches a dial
pattern in an "allowed" class of service that is assigned to the station, Voice Processing
application, or trunk group being used.
COS 07 – Deny Local Calls: Calls to numbers that match the dial patterns for this class
of service (defaults to N+) are restricted, unless the number also matches a dial pattern
in an "allowed" class of service that is assigned to the station, Voice Processing applica-
tion, or trunk group being used.
COS 08 – Denied Numbers: Calls to numbers that match the dial patterns for this class
of service (defaults to 1900NXXXXXX+ and 976XXXX+) are restricted, unless the
number also matches a dial pattern in an "allowed" class of service that is assigned to
the station, Voice Processing application, or trunk group being used.
COS 09 – Allowed Numbers: Calls to numbers that match with the dial patterns for
this class of service, defaults to 1(800, 888, 877, 866, 855, 844, 833, and
822)NXXXXXX+, are allowed, even if number also matches a dial pattern in a
restricted class of service that is assigned to the station, Voice Processing application, or
trunk group being used.
COS 01 – ARS Only: (This is a station COS only. It is not used for trunk groups. Also,
it cannot be used unless the ARS premium feature is licensed.) Calls can only be placed
using the Automatic Route Selection (ARS) feature when this restriction is assigned.
The user will hear reorder tones when attempting to place a call using any other
method. A restricted user can still select individual trunks if the trunks are designated as
"exempt from ARS Only" (as described on
on hold, or are recalling or ringing. Trunk restriction determines which trunks in the
ARS route group can be selected by the station or Voice Processing application.
COS 02 – Deny Operator: Calls to numbers that match the dial patterns for this class
of service (defaults to R+) are restricted, unless the number also matches a dial pattern
in an "allowed" class of service that is assigned to the station, Voice Processing Unit
application, or trunk group being used.
COS 03 – Deny Toll Access: Calls to numbers that match the dial patterns for this class
of service (defaults to TN+, TE, 010+, and T1+) are restricted, unless the number also
matches a dial pattern in an "allowed" class of service that is assigned to the station,
Voice Processing Unit application, or trunk group being used.
COS 04 – Deny International: Calls to numbers that match the dial patterns for this
class of service (defaults to I+) are restricted, unless the number also matches a dial pat-
tern in an "allowed" class of service that is assigned to the station, Voice Processing
application, or trunk group being used.
page 5-104), were transferred, were placed
Classes Of Service (COS)